How To Install Magnaclean

Magnaclean has been used in many households for quite some time, and the reasons are fairly simple as to why it’s so popular. It can help make sure that your heating system does not suffer in any way and guarantees that you will keep a high level of efficiency throughout your home. Installing Magnaclean isn’t as easy as it might say on the tin, though, and requires a little bit of messing around making sure that you install it just right and don’t put yourself under any undue pressure.

If you aren’t sure about what you are doing, then getting in touch with an expert who can give you professional assistance should be on your list of priorities. Don’t take any risks with trying to install Magnaclean yourself. These instructions below should make it easy enough for you, but if something is unclear don’t just assume or attempt it yourself – get in touch with a professional instead.

Instructions

1. Begin by starting a drain on your central heating, as well as your expansion tank and your plug-off feeds. Let the system’s pressure be totally released. Now, start making markings on sections. You will make a 110mm section for a 22mm unit, and a 195mm section for a 28mm unit. This is fairly simple to do, and again look for professional help if you need it.

2. This is super important – make sure that you always leave a gap of around 250mm between the bottom of the central heating system and the top of the Magnaclean canister. This will make it much easier for taking off and cleaning out for servicing down the line.

3. Using cutters, remove the pipework section that you need to add in your Magnaclean system. This should be fairly easy to spot where it should be, but it’s impossible to say directly as every system is different.

4. Start to prepare your piping & fittings, and lubricate up the olives and then start to include the valves onto the pipe. Once the valves are attached properly, use your hands and tighten the fittings to a point where they won’t move.

5. Start to include the MagnaClean canister onto the valves below, and tighten up your compression fittings. Don’t go too tight, though, as it can start to hurt the efficiency starting immediately.

6. Loosen the valve nuts, and add on the rubber washers that you got with your MagnaClean. Next, tighten up the valve until its tight but not tight enough to restrict operations.

7. Turn your heating system back on and run the system to look for any mistakes or problems along the way.

Again, if you have any problems whatsoever fitting your MagnaClean system then your best bet is to contact a plumbing professional in your area for more details on how it can be completed perfectly for your own system.

How To Repair Common Air Conditioner Problems

Many people usually call the repair guy whenever their air conditioners stop working. While the repair guys easily repair the units, they usually charge expensively; therefore, they tend to be unaffordable for many people.

If you are one of the people who can’t afford to hire a repair guy, you need to know how to repair the units. To guide you through, here are ways on how to repair common air conditioner problems.

Unit fails to turn on

When your unit fails to turn on, the first thing you should do is to take a look at the thermostat and see whether it’s working. If the thermostat is working, you should reset it.

Another thing you need to do is to take a look at the circuit breakers. Before you reset the circuit breakers you should first determine where the problem is. When you reset the breaker and it trips again, you should consider calling a professional to help you out.

Strange noises

If your unit is vibrating or rattling, it could be as a result of improper installation. To correct the problem you only need to install the unit properly.

Squealing noises are also common and they are caused by a dislodged belt. When you notice these noises you should turn off your unit and fix the belt.

Failure of the air conditioner to cool the house

If your unit is working inside but it’s not cooling the house, the problem could be as a result of a frosted line which means that there is no proper air flow across the coils of the inside unit.

To correct the problem you should turn off the unit at thermostat by turning the fan from “auto” to “on” at all times. You should then put on the air conditioner and see if there are any improvements. If there is no improvement you should call a professional to help you out.

Other than taking a look at the lines, you should also take a look at the air filters and check whether they are dirty. If they are dirty, you should replace them.

Odor

Bad smell is a sign of accumulation of fungi, molds, and mildew. The best way of solving the problem is replacing the filter.

Conclusion

These are the ways on how to repair the most common air conditioner problems. As mentioned, you should always consider hiring a professional to help you out with the repair when you find yourself unable to correct a problem.

Advantages of Installing Copper Gutters and Downspouts

Water may accumulate on the roof of your house due to rain, snow or ice causing considerable damage to the roof, walls, sidings and foundation of your house. In order to maintain the hygiene of your house and protecting it against possible water damages, it is extremely important to install gutters and downspouts on your house roof.

Various materials are used for the manufacturing of gutters. Among the various materials, copper is one of the most significant ones. Let us discuss some of the advantageous features of copper gutters and downspouts:

Appearance: Copper has a traditional, elegant and sophisticated look that can add enormously to the beauty of your house. In addition, copper gutters are available in a variety of shapes that you can choose from based on your preferences and requirements. For example, you can either choose some of the traditional rectangular or round shaped gutters or gutters with some kind of unique designs imprinted on them.

Durability: Copper gutters are highly durable and long-lasting with the ability to withstand any kind of weather conditions. No matter what the temperature is, copper gutters are immensely resistant to corrosion. Even when they are exposed to the extremities of the outer elements for years, they are not likely to lose their functionality.

Low Maintenance: Copper can effectively prevent the growth of moss and lichens by serving as an excellent fungicide and algaecide. This can be extremely beneficial for these kinds of growths can cause severe blockage in the gutter systems and call for frequent maintenance and servicing.

Self-protection: Even when copper is exposed to the outer elements for a long time, it has the ability to protect itself by forming a patina that makes it resistant to corrosion in any kind of environmental conditions. Forming the patina is copper’s own way of protecting itself against outer elements.

Maintenance-Free: Copper is almost maintenance-free. Owing to the fact that it has the ability to withstand any kind of environmental condition and is highly resistant to corrosion, you do not need to follow a regular maintenance regime with this material. Apart from clearing dirt and debris from the system occasionally, you don’t need to follow a frequent maintenance regime with copper gutters.

Cost-Effective: Owing to being an expensive material, the initial charges for installing copper gutters and downspouts can be quite high. However, since they are highly durable and are almost maintenance-free, they eventually help in saving a great deal of money. So if you are hesitating for the initial expenses involved in the installation of copper gutters, you must remember that in the long run you would save a great deal of money required for maintenance and repairing.

Copper gutters have innumerable advantageous features. However, in order to install them in a flawless manner, it is extremely important to hire an experienced, efficient and a reliable gutter installer. One of the most significant aspects that help in determining the reliability of a gutter installer is their reputation. Reputation speaks loads about the kind of services an installer is capable of providing. Before you choose a gutter installer, you must make sure that they are adequately experienced and highly reputed.